Auto repair for automobile engine belt wear and prevent aging, are defined, in front of the definition of rare machine belt, the belt bears the primary outcome. In the proposed machine, via a belt drive of the auxiliary operation, such as shrink machine, air conditioner power steering pump, alternator etc.. If the belt is broken, perhaps there is a slip, will make the relevant auxiliaryloss function, or the function decline, and affect the normal use of the car.

Belt inspection process is quite simple. First check the belt tension, then you can use the thumb,press the 2 strong middle belt pulley. According to the pressure is about 10kg, the reductionhypothesis belt around 10mm, that is suitable for belt tension at. If pressure is too large, is that the lack of belt tension. If the belt there is almost no reduction, is that the belt tension is too large. Lack of tension, the belt is very easy be slipping. The tension is too large, easy damage of the auxiliary bearing. Therefore, should take corresponding adjustment nut or bolt loosen, thebelt tension adjustment to the best shape.

In addition, car repair must also wear belt. The old belt wear serious, so that the contact area ofthe belt and pulley dropped. Then just pressed the belt, the belt can be deeply sunk to thepulley groove. The rubber belt and a rubber belt that serious problem of aging, aging, mustpromptly change the new belt.

The automobile engine is the car brain, if the engine is bad, a car is useless. The car every dayto run in the street, a long time, may cause the engine belt wear or aging, so the owners generally over a period of time, will start to check the belt, so as to avoid unnecessary trouble.